OPEN SPACE TRAJECTORY PARTITION¶

Introduction¶

Apollo planning is scenario based, where each driving use case is treated as a different driving scenario.

Open space trajectory partition task is used to partition and optimize stiched trajectroy obtained from open space trajectory provider task.

Where is the code¶

Please refer open space trajectory parition.

Code Reading¶

Input : stitched trajectory(without optimization) / vehicle position info.

The interpolated trajectory is obtained by calling InterpolateTrajectory() to increase stitched trajectory points.

void InterpolateTrajectory(
    const DiscretizedTrajectory& stitched_trajectory_result,
    DiscretizedTrajectory* interpolated_trajectory);

According to the heading angle and traking angle, the gear shift point can be determined. Use std::vector<TrajGearPair> to store gear infomation and trajectory points, then partition trajectory into a group of trajectories from the gear shift point.
```
void PartitionTrajectory(const DiscretizedTrajectory& trajectory,
                         std::vector<TrajGearPair>* partitioned_trajectories);       
```

If replan due to fallback stop, the position init staus will be set to false.

When replan success, we use AdjustRelativeTimeAndS() to adjust partitioned trajectories obtained from step 3.

void AdjustRelativeTimeAndS(
    const std::vector<TrajGearPair>& partitioned_trajectories,
    const size_t current_trajectory_index,
    const size_t closest_trajectory_point_index,
    DiscretizedTrajectory* stitched_trajectory_result,
    TrajGearPair* current_partitioned_trajectory);

When fallback is not required, choose the closest partitioned trajectory to follow.

Base on ADC position, heading, body size and velocity info, we get vehicle center point info and moving direction.

    void UpdateVehicleInfo();

Encode partitioned trajectories;

    bool EncodeTrajectory(const DiscretizedTrajectory& trajectory,
                        std::string* const encoding);     

To find the closest point on trajectory, a search range needed to be determined. It requires the distance between path end point and ADC enter point, the heading search difference and the head track difference all within the threshold.

Base on ADC box and path point box, the IOU(intersection over union) is computed for each path point in the search range.

If the IOU of the trajectory end point is bigger than threshold and partitioned trajectories group has other trajectory can be used, it means ADC reach the end of a trajectory, another trajectory to be used.

Then update trajectory history to store which trajectory has been used.

    bool CheckReachTrajectoryEnd(const DiscretizedTrajectory& trajectory,
                                const canbus::Chassis::GearPosition& gear,
                                const size_t trajectories_size,
                                const size_t trajectories_index,
                                size_t* current_trajectory_index,
                                size_t* current_trajectory_point_index);

    bool CheckTrajTraversed(const std::string& trajectory_encoding_to_check);

    void UpdateTrajHistory(const std::string& chosen_trajectory_encoding);

When there is no need for ADC to switch to next trajectory, use IOU info mentioned above to find the closest trajectory point(the biggest IOU point) to follow.
If the closest trajectory point doesn’t belong to current trajectory or couldn’t find closest trajectory point due to some unnormal cases, we use UseFailSafeSearch() to get a safe trajectory to follow.

When using this function, we only care about distance between path end point and ADC enter point to find the search range, no more limitation on angle difference.

    bool UseFailSafeSearch(
        const std::vector<TrajGearPair>& partitioned_trajectories,
        const std::vector<std::string>& trajectories_encodings,
        size_t* current_trajectory_index, size_t* current_trajectory_point_index);

If FLAGS_use_gear_shift_trajectory() set to be true, a small part trajectory obtained by calling GenerateGearShiftTrajectory() will be added to make vehicle moving smoothly during gear shifting. Otherwise we use AdjustRelativeTimeAndS() to adjust partitioned trajectory.

    bool InsertGearShiftTrajectory(
        const bool flag_change_to_next, const size_t current_trajectory_index,
        const std::vector<TrajGearPair>& partitioned_trajectories,
        TrajGearPair* gear_switch_idle_time_trajectory);

    void GenerateGearShiftTrajectory(
        const canbus::Chassis::GearPosition& gear_position,
        TrajGearPair* gear_switch_idle_time_trajectory);

    void AdjustRelativeTimeAndS(
        const std::vector<TrajGearPair>& partitioned_trajectories,
        const size_t current_trajectory_index,
        const size_t closest_trajectory_point_index,
        DiscretizedTrajectory* stitched_trajectory_result,
        TrajGearPair* current_partitioned_trajectory);

Return process status.
Output: partitioned trajectories.

OPTIMIZE COARSE TRAJECTORY

GENERATE FINAL TRAJECTORY

Apollo Auto 0.0.1 文档

OPEN SPACE TRAJECTORY PARTITION¶

Introduction¶

Where is the code¶

Code Reading¶