You're reading the documentation for a development version. For the latest released version, please have a look at Galactic.

Understanding ROS 2 parameters

Goal: Learn how to get, set, save and reload parameters in ROS 2.

Tutorial level: Beginner

Time: 5 minutes

Contents

Background
Prerequisites
Tasks
Summary
Next steps

Background 

A parameter is a configuration value of a node. You can think of parameters as node settings. A node can store parameters as integers, floats, booleans, strings and lists. In ROS 2, each node maintains its own parameters. All parameters are dynamically reconfigurable, and built off of ROS 2 services.

Prerequisites 

This tutorial uses the turtlesim package.

As always, don’t forget to source ROS 2 in every new terminal you open.

Tasks 

1 Setup 

Start up the two turtlesim nodes, /turtlesim and /teleop_turtle.

Open a new terminal and run:

ros2 run turtlesim turtlesim_node

Open another terminal and run:

ros2 run turtlesim turtle_teleop_key

2 ros2 param list 

To see the parameters belonging to your nodes, open a new terminal and enter the command:

ros2 param list

You will see the node namespaces, /teleop_turtle and /turtlesim, followed by each node’s parameters:

/teleop_turtle:
  qos_overrides./parameter_events.publisher.depth
  qos_overrides./parameter_events.publisher.durability
  qos_overrides./parameter_events.publisher.history
  qos_overrides./parameter_events.publisher.reliability
  scale_angular
  scale_linear
  use_sim_time
/turtlesim:
  background_b
  background_g
  background_r
  qos_overrides./parameter_events.publisher.depth
  qos_overrides./parameter_events.publisher.durability
  qos_overrides./parameter_events.publisher.history
  qos_overrides./parameter_events.publisher.reliability
  use_sim_time

Every node has the parameter use_sim_time; it’s not unique to turtlesim.

Based on their names, it looks like /turtlesim’s parameters determine the background color of the turtlesim window using RGB color values.

To determine a parameter’s type, you can use ros2 param get.

3 ros2 param get 

To display the type and current value of a parameter, use the command:

ros2 param get <node_name> <parameter_name>

Let’s find out the current value of /turtlesim’s parameter background_g:

ros2 param get /turtlesim background_g

Which will return the value:

Integer value is: 86

Now you know background_g holds an integer value.

If you run the same command on background_r and background_b, you will get the values 69 and 255, respectively.

4 ros2 param set 

To change a parameter’s value at runtime, use the command:

ros2 param set <node_name> <parameter_name> <value>

Let’s change /turtlesim’s background color:

ros2 param set /turtlesim background_r 150

Your terminal should return the message:

Set parameter successful

And the background of your turtlesim window should change colors:

Setting parameters with the set command will only change them in your current session, not permanently. However, you can save your settings and reload them the next time you start a node.

5 ros2 param dump 

You can view all of a node’s current parameter values by using the command:

ros2 param dump <node_name>

The command prints to the standard output (stdout) by default but you can also redirect the parameter values into a file to save them for later. To save your current configuration of /turtlesim’s parameters into the file turtlesim.yaml, enter the command:

ros2 param dump /turtlesim > turtlesim.yaml

You will find a new file in the working directory your shell is running in. If you open this file, you’ll see the following content:

/turtlesim:
  ros__parameters:
    background_b: 255
    background_g: 86
    background_r: 150
    qos_overrides:
      /parameter_events:
        publisher:
          depth: 1000
          durability: volatile
          history: keep_last
          reliability: reliable
    use_sim_time: false

Dumping parameters comes in handy if you want to reload the node with the same parameters in the future.

6 ros2 param load 

You can load parameters from a file to a currently running node using the command:

ros2 param load <node_name> <parameter_file>

To load the turtlesim.yaml file generated with ros2 param dump into /turtlesim node’s parameters, enter the command:

ros2 param load /turtlesim turtlesim.yaml

Your terminal will return the message:

Set parameter background_b successful
Set parameter background_g successful
Set parameter background_r successful
Set parameter qos_overrides./parameter_events.publisher.depth failed: parameter 'qos_overrides./parameter_events.publisher.depth' cannot be set because it is read-only
Set parameter qos_overrides./parameter_events.publisher.durability failed: parameter 'qos_overrides./parameter_events.publisher.durability' cannot be set because it is read-only
Set parameter qos_overrides./parameter_events.publisher.history failed: parameter 'qos_overrides./parameter_events.publisher.history' cannot be set because it is read-only
Set parameter qos_overrides./parameter_events.publisher.reliability failed: parameter 'qos_overrides./parameter_events.publisher.reliability' cannot be set because it is read-only
Set parameter use_sim_time successful

注解

Read-only parameters can only be modified at startup and not afterwards, that is why there are some warnings for the “qos_overrides” parameters.

7 Load parameter file on node startup 

To start the same node using your saved parameter values, use:

ros2 run <package_name> <executable_name> --ros-args --params-file <file_name>

This is the same command you always use to start turtlesim, with the added flags --ros-args and --params-file, followed by the file you want to load.

Stop your running turtlesim node so you can try reloading it with your saved parameters, using:

ros2 run turtlesim turtlesim_node --ros-args --params-file turtlesim.yaml

The turtlesim window should appear as usual, but with the purple background you set earlier.

注解

In this case, parameters are being modified at startup so the specified read-only parameters will also take effect.

Summary 

Nodes have parameters to define their default configuration values. You can get and set parameter values from the command line. You can also save the parameter settings to a file to reload them in a future session.

Next steps 

Jumping back to ROS 2 communication methods, in the next tutorial you’ll learn about actions.