Chart - Categories

  • A category can be None, meaning the category exists, but there is no label for it.

    • The string value of it can be ‘’, since it needs to be a string. But the .label value will be None.

Caveats

  • Categories are read from the first series in the plot. In all normal situations I’ve ever encountered, all series have exactly the same set of categories.

    I’m not sure why the category labels are redundantly applied to each series, but the fact that they are leads me to believe I must be missing something; I don’t believe they would repeat them like that if there wasn’t a situation in which they could be different between two series in the same plot.

    Consequently, there might be some edge cases where this won’t work quite as expected. At the same time, I expect it will work exactly as expected for 99.9% of the cases, maybe 99.99%.

  • Categories are not enforced to be strictly hierarchical. So if a higher-level category “breaks” (gets a new value) without also a new value at the next level, the results might be a little weird. Like changing from USA to Canada, but leaving NY as the state (by leaving that cell blank).

    Basically, the meaning of a structure like this is ambiguous. PowerPoint interprets it without error and python-pptx interprets it without error, but the results might not exactly match up. PowerPoint seems to take the senior category break and show the intermediate category as blank or ‘None’. But I suppose it could be interpreted as the senior category just splits a subordinate one; it’s open to some question.

Multilevel Categories

A category chart can have more than one level of categories, where each individual category is nested in a higher-level category.

https://www.youtube.com/watch?v=KbyQpzA7fLo

Acceptance Tests

cht-plot-props.feature:

Scenario: Get CategoryPlot.categories
  Given a category plot
   Then plot.categories is a Categories object

cht-categories.feature:

Scenario: Categories.__len__()
  Given a Categories object having 3 categories
   Then len(categories) is 3

Scenario: Categories.__getitem__()
  Given a Categories object having 3 categories
   Then categories[2] is a Category object

Scenario: Categories.__iter__()
  Given a Categories object having 3 categories
   Then iterating categories produces 3 Category objects

Scenario: Categories.depth
  Given a Categories object having 3 levels of categories
   Then categories.depth is 3

Scenario: Categories.flattened
  Given a Categories object having 3 levels of categories
   Then categories.flattened is tuple of 3-tuples

cht-category.feature:

Scenario: Category derives from string
  Given a Category object
   Then isinstance(category, str) is True

XML semantics

  • The hierarchy of the levels is indicated by their document order.

  • The scope of non-leaf category entries is indicated by the ‘idx’ attribute value. A non-leaf category spans from the leaf node having the matching idx to the last leaf node not contained in its subsequent sibling.

  • The idx value on each <c:pt> element identifies the element for possible overrides, like manual positioning or deletion (hiding). It may also key it to the values in the series and/or other items; the spec is silent on these details.

  • I can’t find a way to set the c:noMultiLvlLbl element truthy using the UI. I suspect this is only an Excel option.

  • The c:lvl element does not appear when there is only a single level of categories. Also in that case, a c:strCache element contains the c:pt elements rather than a c:multiLvlStrCache element.

  1. What behavior is produced by a truthy value in c:catAx/c:noMultiLvlLbl/@val when there are multiple levels of categories defined?

XML specimens

Single-level categories (common case):

<c:cat>
  <c:strRef>
    <c:f>Sheet1!$A$2:$A$5</c:f>
    <c:strCache>
      <c:ptCount val="4"/>
      <c:pt idx="0">
        <c:v>Category 1</c:v>
      </c:pt>
      <c:pt idx="1">
        <c:v>Category 2</c:v>
      </c:pt>
      <c:pt idx="2">
        <c:v>Category 3</c:v>
      </c:pt>
      <c:pt idx="3">
        <c:v>Category 4</c:v>
      </c:pt>
    </c:strCache>
  </c:strRef>
</c:cat>

Multi-level categories:

<c:cat>
   <c:multiLvlStrRef>
     <c:f>Sheet1!$C$1:$J$3</c:f>
     <c:multiLvlStrCache>
       <c:ptCount val="8"/>
       <c:lvl>
         <c:pt idx="0">
           <c:v>county one</c:v>
         </c:pt>
         <c:pt idx="1">
           <c:v>county two</c:v>
         </c:pt>
         <c:pt idx="2">
           <c:v>county one</c:v>
         </c:pt>
         <c:pt idx="3">
           <c:v>county two</c:v>
         </c:pt>
         <c:pt idx="4">
           <c:v>county one</c:v>
         </c:pt>
         <c:pt idx="5">
           <c:v>county two</c:v>
         </c:pt>
         <c:pt idx="6">
           <c:v>country one</c:v>
         </c:pt>
         <c:pt idx="7">
           <c:v>county two</c:v>
         </c:pt>
       </c:lvl>
       <c:lvl>
         <c:pt idx="0">
           <c:v>city one</c:v>
         </c:pt>
         <c:pt idx="2">
           <c:v>city two </c:v>
         </c:pt>
         <c:pt idx="4">
           <c:v>city one</c:v>
         </c:pt>
         <c:pt idx="6">
           <c:v>city two </c:v>
         </c:pt>
       </c:lvl>
       <c:lvl>
         <c:pt idx="0">
           <c:v>UK</c:v>
         </c:pt>
         <c:pt idx="4">
           <c:v>US</c:v>
         </c:pt>
       </c:lvl>
     </c:multiLvlStrCache>
   </c:multiLvlStrRef>
 </c:cat>


<c:catAx>
  ...
  <c:noMultiLvlLbl val="0"/>
</c:catAx>