如何重新运行失败的测试并在测试运行之间保持状态¶

用法¶

The plugin provides two command line options to rerun failures from the last pytest invocation:

--lf, --last-failed - to only re-run the failures.
--ff, --failed-first - to run the failures first and then the rest of the tests.

For cleanup (usually not needed), a --cache-clear option allows to remove all cross-session cache contents ahead of a test run.

Other plugins may access the config.cache object to set/get json encodable values between pytest invocations.

备注

This plugin is enabled by default, but can be disabled if needed: see Deactivating / unregistering a plugin by name (the internal name for this plugin is cacheprovider).

Rerunning only failures or failures first¶

First, let’s create 50 test invocation of which only 2 fail:

# content of test_50.py
import pytest


@pytest.mark.parametrize("i", range(50))
def test_num(i):
    if i in (17, 25):
        pytest.fail("bad luck")

If you run this for the first time you will see two failures:

$ pytest -q
.................F.......F........................                   [100%]
================================= FAILURES =================================
_______________________________ test_num[17] _______________________________

i = 17

    @pytest.mark.parametrize("i", range(50))
    def test_num(i):
        if i in (17, 25):
>           pytest.fail("bad luck")
E           Failed: bad luck

test_50.py:7: Failed
_______________________________ test_num[25] _______________________________

i = 25

    @pytest.mark.parametrize("i", range(50))
    def test_num(i):
        if i in (17, 25):
>           pytest.fail("bad luck")
E           Failed: bad luck

test_50.py:7: Failed
========================= short test summary info ==========================
FAILED test_50.py::test_num[17] - Failed: bad luck
FAILED test_50.py::test_num[25] - Failed: bad luck
2 failed, 48 passed in 0.12s

If you then run it with --lf:

$ pytest --lf
=========================== test session starts ============================
platform linux -- Python 3.x.y, pytest-7.x.y, pluggy-1.x.y
rootdir: /home/sweet/project
collected 2 items
run-last-failure: rerun previous 2 failures

test_50.py FF                                                        [100%]

================================= FAILURES =================================
_______________________________ test_num[17] _______________________________

i = 17

    @pytest.mark.parametrize("i", range(50))
    def test_num(i):
        if i in (17, 25):
>           pytest.fail("bad luck")
E           Failed: bad luck

test_50.py:7: Failed
_______________________________ test_num[25] _______________________________

i = 25

    @pytest.mark.parametrize("i", range(50))
    def test_num(i):
        if i in (17, 25):
>           pytest.fail("bad luck")
E           Failed: bad luck

test_50.py:7: Failed
========================= short test summary info ==========================
FAILED test_50.py::test_num[17] - Failed: bad luck
FAILED test_50.py::test_num[25] - Failed: bad luck
============================ 2 failed in 0.12s =============================

You have run only the two failing tests from the last run, while the 48 passing tests have not been run (“deselected”).

Now, if you run with the --ff option, all tests will be run but the first previous failures will be executed first (as can be seen from the series of FF and dots):

$ pytest --ff
=========================== test session starts ============================
platform linux -- Python 3.x.y, pytest-7.x.y, pluggy-1.x.y
rootdir: /home/sweet/project
collected 50 items
run-last-failure: rerun previous 2 failures first

test_50.py FF................................................        [100%]

================================= FAILURES =================================
_______________________________ test_num[17] _______________________________

i = 17

    @pytest.mark.parametrize("i", range(50))
    def test_num(i):
        if i in (17, 25):
>           pytest.fail("bad luck")
E           Failed: bad luck

test_50.py:7: Failed
_______________________________ test_num[25] _______________________________

i = 25

    @pytest.mark.parametrize("i", range(50))
    def test_num(i):
        if i in (17, 25):
>           pytest.fail("bad luck")
E           Failed: bad luck

test_50.py:7: Failed
========================= short test summary info ==========================
FAILED test_50.py::test_num[17] - Failed: bad luck
FAILED test_50.py::test_num[25] - Failed: bad luck
======================= 2 failed, 48 passed in 0.12s =======================

New --nf, --new-first options: run new tests first followed by the rest of the tests, in both cases tests are also sorted by the file modified time, with more recent files coming first.

Behavior when no tests failed in the last run¶

When no tests failed in the last run, or when no cached lastfailed data was found, pytest can be configured either to run all of the tests or no tests, using the --last-failed-no-failures option, which takes one of the following values:

pytest --last-failed --last-failed-no-failures all    # run all tests (default behavior)
pytest --last-failed --last-failed-no-failures none   # run no tests and exit

The new config.cache object¶

Plugins or conftest.py support code can get a cached value using the pytest config object. Here is a basic example plugin which implements a fixture which re-uses previously created state across pytest invocations:

# content of test_caching.py
import pytest


def expensive_computation():
    print("running expensive computation...")


@pytest.fixture
def mydata(request):
    val = request.config.cache.get("example/value", None)
    if val is None:
        expensive_computation()
        val = 42
        request.config.cache.set("example/value", val)
    return val


def test_function(mydata):
    assert mydata == 23

If you run this command for the first time, you can see the print statement:

$ pytest -q
F                                                                    [100%]
================================= FAILURES =================================
______________________________ test_function _______________________________

mydata = 42

    def test_function(mydata):
>       assert mydata == 23
E       assert 42 == 23

test_caching.py:20: AssertionError
-------------------------- Captured stdout setup ---------------------------
running expensive computation...
========================= short test summary info ==========================
FAILED test_caching.py::test_function - assert 42 == 23
1 failed in 0.12s

If you run it a second time, the value will be retrieved from the cache and nothing will be printed:

$ pytest -q
F                                                                    [100%]
================================= FAILURES =================================
______________________________ test_function _______________________________

mydata = 42

    def test_function(mydata):
>       assert mydata == 23
E       assert 42 == 23

test_caching.py:20: AssertionError
========================= short test summary info ==========================
FAILED test_caching.py::test_function - assert 42 == 23
1 failed in 0.12s

See the config.cache fixture for more details.

Inspecting Cache content¶

You can always peek at the content of the cache using the --cache-show command line option:

$ pytest --cache-show
=========================== test session starts ============================
platform linux -- Python 3.x.y, pytest-7.x.y, pluggy-1.x.y
rootdir: /home/sweet/project
cachedir: /home/sweet/project/.pytest_cache
--------------------------- cache values for '*' ---------------------------
cache/lastfailed contains:
  {'test_caching.py::test_function': True}
cache/nodeids contains:
  ['test_caching.py::test_function']
cache/stepwise contains:
  []
example/value contains:
  42

========================== no tests ran in 0.12s ===========================

--cache-show takes an optional argument to specify a glob pattern for filtering:

$ pytest --cache-show example/*
=========================== test session starts ============================
platform linux -- Python 3.x.y, pytest-7.x.y, pluggy-1.x.y
rootdir: /home/sweet/project
cachedir: /home/sweet/project/.pytest_cache
----------------------- cache values for 'example/*' -----------------------
example/value contains:
  42

========================== no tests ran in 0.12s ===========================

Clearing Cache content¶

You can instruct pytest to clear all cache files and values by adding the --cache-clear option like this:

pytest --cache-clear

This is recommended for invocations from Continuous Integration servers where isolation and correctness is more important than speed.

Stepwise¶

As an alternative to --lf -x, especially for cases where you expect a large part of the test suite will fail, --sw, --stepwise allows you to fix them one at a time. The test suite will run until the first failure and then stop. At the next invocation, tests will continue from the last failing test and then run until the next failing test. You may use the --stepwise-skip option to ignore one failing test and stop the test execution on the second failing test instead. This is useful if you get stuck on a failing test and just want to ignore it until later. Providing --stepwise-skip will also enable --stepwise implicitly.

如何重新运行失败的测试并在测试运行之间保持状态¶

用法¶

Rerunning only failures or failures first¶

Behavior when no tests failed in the last run¶

The new config.cache object¶

Inspecting Cache content¶

Clearing Cache content¶

Stepwise¶

Contents

About the project

Related Topics

Useful Links