Following system colour scheme Selected dark colour scheme Selected light colour scheme

Python Enhancement Proposals

PEP 307 – Extensions to the pickle protocol

Author:
Guido van Rossum, Tim Peters
Status:
Final
Type:
Standards Track
Created:
31-Jan-2003
Python-Version:
2.3
Post-History:
07-Feb-2003

Table of Contents

Introduction

Pickling new-style objects in Python 2.2 is done somewhat clumsily and causes pickle size to bloat compared to classic class instances. This PEP documents a new pickle protocol in Python 2.3 that takes care of this and many other pickle issues.

There are two sides to specifying a new pickle protocol: the byte stream constituting pickled data must be specified, and the interface between objects and the pickling and unpickling engines must be specified. This PEP focuses on API issues, although it may occasionally touch on byte stream format details to motivate a choice. The pickle byte stream format is documented formally by the standard library module pickletools.py (already checked into CVS for Python 2.3).

This PEP attempts to fully document the interface between pickled objects and the pickling process, highlighting additions by specifying “new in this PEP”. (The interface to invoke pickling or unpickling is not covered fully, except for the changes to the API for specifying the pickling protocol to picklers.)

Motivation

Pickling new-style objects causes serious pickle bloat. For example:

class C(object): # Omit "(object)" for classic class
    pass
x = C()
x.foo = 42
print len(pickle.dumps(x, 1))

The binary pickle for the classic object consumed 33 bytes, and for the new-style object 86 bytes.

The reasons for the bloat are complex, but are mostly caused by the fact that new-style objects use __reduce__ in order to be picklable at all. After ample consideration we’ve concluded that the only way to reduce pickle sizes for new-style objects is to add new opcodes to the pickle protocol. The net result is that with the new protocol, the pickle size in the above example is 35 (two extra bytes are used at the start to indicate the protocol version, although this isn’t strictly necessary).

Protocol versions

Previously, pickling (but not unpickling) distinguished between text mode and binary mode. By design, binary mode is a superset of text mode, and unpicklers don’t need to know in advance whether an incoming pickle uses text mode or binary mode. The virtual machine used for unpickling is the same regardless of the mode; certain opcodes simply aren’t used in text mode.

Retroactively, text mode is now called protocol 0, and binary mode protocol 1. The new protocol is called protocol 2. In the tradition of pickling protocols, protocol 2 is a superset of protocol 1. But just so that future pickling protocols aren’t required to be supersets of the oldest protocols, a new opcode is inserted at the start of a protocol 2 pickle indicating that it is using protocol 2. To date, each release of Python has been able to read pickles written by all previous releases. Of course pickles written under protocol N can’t be read by versions of Python earlier than the one that introduced protocol N.

Several functions, methods and constructors used for pickling used to take a positional argument named ‘bin’ which was a flag, defaulting to 0, indicating binary mode. This argument is renamed to ‘protocol’ and now gives the protocol number, still defaulting to 0.

It so happens that passing 2 for the ‘bin’ argument in previous Python versions had the same effect as passing 1. Nevertheless, a special case is added here: passing a negative number selects the highest protocol version supported by a particular implementation. This works in previous Python versions, too, and so can be used to select the highest protocol available in a way that’s both backward and forward compatible. In addition, a new module constant HIGHEST_PROTOCOL is supplied by both pickle and cPickle, equal to the highest protocol number the module can read. This is cleaner than passing -1, but cannot be used before Python 2.3.

The pickle.py module has supported passing the ‘bin’ value as a keyword argument rather than a positional argument. (This is not recommended, since cPickle only accepts positional arguments, but it works…) Passing ‘bin’ as a keyword argument is deprecated, and a PendingDeprecationWarning is issued in this case. You have to invoke the Python interpreter with -Wa or a variation on that to see PendingDeprecationWarning messages. In Python 2.4, the warning class may be upgraded to DeprecationWarning.

Security issues

In previous versions of Python, unpickling would do a “safety check” on certain operations, refusing to call functions or constructors that weren’t marked as “safe for unpickling” by either having an attribute __safe_for_unpickling__ set to 1, or by being registered in a global registry, copy_reg.safe_constructors.

This feature gives a false sense of security: nobody has ever done the necessary, extensive, code audit to prove that unpickling untrusted pickles cannot invoke unwanted code, and in fact bugs in the Python 2.2 pickle.py module make it easy to circumvent these security measures.

We firmly believe that, on the Internet, it is better to know that you are using an insecure protocol than to trust a protocol to be secure whose implementation hasn’t been thoroughly checked. Even high quality implementations of widely used protocols are routinely found flawed; Python’s pickle implementation simply cannot make such guarantees without a much larger time investment. Therefore, as of Python 2.3, all safety checks on unpickling are officially removed, and replaced with this warning:

警告

Do not unpickle data received from an untrusted or unauthenticated source.

The same warning applies to previous Python versions, despite the presence of safety checks there.

Extended __reduce__ API

There are several APIs that a class can use to control pickling. Perhaps the most popular of these are __getstate__ and __setstate__; but the most powerful one is __reduce__. (There’s also __getinitargs__, and we’re adding __getnewargs__ below.)

There are several ways to provide __reduce__ functionality: a class can implement a __reduce__ method or a __reduce_ex__ method (see next section), or a reduce function can be declared in copy_reg (copy_reg.dispatch_table maps classes to functions). The return values are interpreted exactly the same, though, and we’ll refer to these collectively as __reduce__.

Important: pickling of classic class instances does not look for a __reduce__ or __reduce_ex__ method or a reduce function in the copy_reg dispatch table, so that a classic class cannot provide __reduce__ functionality in the sense intended here. A classic class must use __getinitargs__ and/or __getstate__ to customize pickling. These are described below.

__reduce__ must return either a string or a tuple. If it returns a string, this is an object whose state is not to be pickled, but instead a reference to an equivalent object referenced by name. Surprisingly, the string returned by __reduce__ should be the object’s local name (relative to its module); the pickle module searches the module namespace to determine the object’s module.

The rest of this section is concerned with the tuple returned by __reduce__. It is a variable size tuple, of length 2 through 5. The first two items (function and arguments) are required. The remaining items are optional and may be left off from the end; giving None for the value of an optional item acts the same as leaving it off. The last two items are new in this PEP. The items are, in order:

function Required.

A callable object (not necessarily a function) called to create the initial version of the object; state may be added to the object later to fully reconstruct the pickled state. This function must itself be picklable. See the section about __newobj__ for a special case (new in this PEP) here.

arguments Required.

A tuple giving the argument list for the function. As a special case, designed for Zope 2’s ExtensionClass, this may be None; in that case, function should be a class or type, and function.__basicnew__() is called to create the initial version of the object. This exception is deprecated.

Unpickling invokes function(*arguments) to create an initial object, called obj below. If the remaining items are left off, that’s the end of unpickling for this object and obj is the result. Else obj is modified at unpickling time by each item specified, as follows.

state Optional.

Additional state. If this is not None, the state is pickled, and obj.__setstate__(state) will be called when unpickling. If no __setstate__ method is defined, a default implementation is provided, which assumes that state is a dictionary mapping instance variable names to their values. The default implementation calls

obj.__dict__.update(state)

or, if the update() call fails,

for k, v in state.items():
    setattr(obj, k, v)
listitems Optional, and new in this PEP.

If this is not None, it should be an iterator (not a sequence!) yielding successive list items. These list items will be pickled, and appended to the object using either obj.append(item) or obj.extend(list_of_items). This is primarily used for list subclasses, but may be used by other classes as long as they have append() and extend() methods with the appropriate signature. (Whether append() or extend() is used depends on which pickle protocol version is used as well as the number of items to append, so both must be supported.)

dictitems Optional, and new in this PEP.

If this is not None, it should be an iterator (not a sequence!) yielding successive dictionary items, which should be tuples of the form (key, value). These items will be pickled, and stored to the object using obj[key] = value. This is primarily used for dict subclasses, but may be used by other classes as long as they implement __setitem__.

Note: in Python 2.2 and before, when using cPickle, state would be pickled if present even if it is None; the only safe way to avoid the __setstate__ call was to return a two-tuple from __reduce__. (But pickle.py would not pickle state if it was None.) In Python 2.3, __setstate__ will never be called at unpickling time when __reduce__ returns a state with value None at pickling time.

A __reduce__ implementation that needs to work both under Python 2.2 and under Python 2.3 could check the variable pickle.format_version to determine whether to use the listitems and dictitems features. If this value is >= "2.0" then they are supported. If not, any list or dict items should be incorporated somehow in the ‘state’ return value, and the __setstate__ method should be prepared to accept list or dict items as part of the state (how this is done is up to the application).

The __reduce_ex__ API

It is sometimes useful to know the protocol version when implementing __reduce__. This can be done by implementing a method named __reduce_ex__ instead of __reduce__. __reduce_ex__, when it exists, is called in preference over __reduce__ (you may still provide __reduce__ for backwards compatibility). The __reduce_ex__ method will be called with a single integer argument, the protocol version.

The ‘object’ class implements both __reduce__ and __reduce_ex__; however, if a subclass overrides __reduce__ but not __reduce_ex__, the __reduce_ex__ implementation detects this and calls __reduce__.

Customizing pickling absent a __reduce__ implementation

If no __reduce__ implementation is available for a particular class, there are three cases that need to be considered separately, because they are handled differently:

  1. classic class instances, all protocols
  2. new-style class instances, protocols 0 and 1
  3. new-style class instances, protocol 2

Types implemented in C are considered new-style classes. However, except for the common built-in types, these need to provide a __reduce__ implementation in order to be picklable with protocols 0 or 1. Protocol 2 supports built-in types providing __getnewargs__, __getstate__ and __setstate__ as well.

Case 1: pickling classic class instances

This case is the same for all protocols, and is unchanged from Python 2.1.

For classic classes, __reduce__ is not used. Instead, classic classes can customize their pickling by providing methods named __getstate__, __setstate__ and __getinitargs__. Absent these, a default pickling strategy for classic class instances is implemented that works as long as all instance variables are picklable. This default strategy is documented in terms of default implementations of __getstate__ and __setstate__.

The primary ways to customize pickling of classic class instances is by specifying __getstate__ and/or __setstate__ methods. It is fine if a class implements one of these but not the other, as long as it is compatible with the default version.

The __getstate__ method

The __getstate__ method should return a picklable value representing the object’s state without referencing the object itself. If no __getstate__ method exists, a default implementation is used that returns self.__dict__.

The __setstate__ method

The __setstate__ method should take one argument; it will be called with the value returned by __getstate__ (or its default implementation).

If no __setstate__ method exists, a default implementation is provided that assumes the state is a dictionary mapping instance variable names to values. The default implementation tries two things:

  • First, it tries to call self.__dict__.update(state).
  • If the update() call fails with a RuntimeError exception, it calls setattr(self, key, value) for each (key, value) pair in the state dictionary. This only happens when unpickling in restricted execution mode (see the rexec standard library module).

The __getinitargs__ method

The __setstate__ method (or its default implementation) requires that a new object already exists so that its __setstate__ method can be called. The point is to create a new object that isn’t fully initialized; in particular, the class’s __init__ method should not be called if possible.

These are the possibilities:

  • Normally, the following trick is used: create an instance of a trivial classic class (one without any methods or instance variables) and then use __class__ assignment to change its class to the desired class. This creates an instance of the desired class with an empty __dict__ whose __init__ has not been called.
  • However, if the class has a method named __getinitargs__, the above trick is not used, and a class instance is created by using the tuple returned by __getinitargs__ as an argument list to the class constructor. This is done even if __getinitargs__ returns an empty tuple — a __getinitargs__ method that returns () is not equivalent to not having __getinitargs__ at all. __getinitargs__ must return a tuple.
  • In restricted execution mode, the trick from the first bullet doesn’t work; in this case, the class constructor is called with an empty argument list if no __getinitargs__ method exists. This means that in order for a classic class to be unpicklable in restricted execution mode, it must either implement __getinitargs__ or its constructor (i.e., its __init__ method) must be callable without arguments.

Case 2: pickling new-style class instances using protocols 0 or 1

This case is unchanged from Python 2.2. For better pickling of new-style class instances when backwards compatibility is not an issue, protocol 2 should be used; see case 3 below.

New-style classes, whether implemented in C or in Python, inherit a default __reduce__ implementation from the universal base class ‘object’.

This default __reduce__ implementation is not used for those built-in types for which the pickle module has built-in support. Here’s a full list of those types:

  • Concrete built-in types: NoneType, bool, int, float, complex, str, unicode, tuple, list, dict. (Complex is supported by virtue of a __reduce__ implementation registered in copy_reg.) In Jython, PyStringMap is also included in this list.
  • Classic instances.
  • Classic class objects, Python function objects, built-in function and method objects, and new-style type objects (== new-style class objects). These are pickled by name, not by value: at unpickling time, a reference to an object with the same name (the fully qualified module name plus the variable name in that module) is substituted.

The default __reduce__ implementation will fail at pickling time for built-in types not mentioned above, and for new-style classes implemented in C: if they want to be picklable, they must supply a custom __reduce__ implementation under protocols 0 and 1.

For new-style classes implemented in Python, the default __reduce__ implementation (copy_reg._reduce) works as follows:

Let D be the class on the object to be pickled. First, find the nearest base class that is implemented in C (either as a built-in type or as a type defined by an extension class). Call this base class B, and the class of the object to be pickled D. Unless B is the class ‘object’, instances of class B must be picklable, either by having built-in support (as defined in the above three bullet points), or by having a non-default __reduce__ implementation. B must not be the same class as D (if it were, it would mean that D is not implemented in Python).

The callable produced by the default __reduce__ is copy_reg._reconstructor, and its arguments tuple is (D, B, basestate), where basestate is None if B is the builtin object class, and basestate is

basestate = B(obj)

if B is not the builtin object class. This is geared toward pickling subclasses of builtin types, where, for example, list(some_list_subclass_instance) produces “the list part” of the list subclass instance.

The object is recreated at unpickling time by copy_reg._reconstructor, like so:

obj = B.__new__(D, basestate)
B.__init__(obj, basestate)

Objects using the default __reduce__ implementation can customize it by defining __getstate__ and/or __setstate__ methods. These work almost the same as described for classic classes above, except that if __getstate__ returns an object (of any type) whose value is considered false (e.g. None, or a number that is zero, or an empty sequence or mapping), this state is not pickled and __setstate__ will not be called at all. If __getstate__ exists and returns a true value, that value becomes the third element of the tuple returned by the default __reduce__, and at unpickling time the value is passed to __setstate__. If __getstate__ does not exist, but obj.__dict__ exists, then obj.__dict__ becomes the third element of the tuple returned by __reduce__, and again at unpickling time the value is passed to obj.__setstate__. The default __setstate__ is the same as that for classic classes, described above.

Note that this strategy ignores slots. Instances of new-style classes that have slots but no __getstate__ method cannot be pickled by protocols 0 and 1; the code explicitly checks for this condition.

Note that pickling new-style class instances ignores __getinitargs__ if it exists (and under all protocols). __getinitargs__ is useful only for classic classes.

Case 3: pickling new-style class instances using protocol 2

Under protocol 2, the default __reduce__ implementation inherited from the ‘object’ base class is ignored. Instead, a different default implementation is used, which allows more efficient pickling of new-style class instances than possible with protocols 0 or 1, at the cost of backward incompatibility with Python 2.2 (meaning no more than that a protocol 2 pickle cannot be unpickled before Python 2.3).

The customization uses three special methods: __getstate__, __setstate__ and __getnewargs__ (note that __getinitargs__ is again ignored). It is fine if a class implements one or more but not all of these, as long as it is compatible with the default implementations.

The __getstate__ method

The __getstate__ method should return a picklable value representing the object’s state without referencing the object itself. If no __getstate__ method exists, a default implementation is used which is described below.

There’s a subtle difference between classic and new-style classes here: if a classic class’s __getstate__ returns None, self.__setstate__(None) will be called as part of unpickling. But if a new-style class’s __getstate__ returns None, its __setstate__ won’t be called at all as part of unpickling.

If no __getstate__ method exists, a default state is computed. There are several cases:

  • For a new-style class that has no instance __dict__ and no __slots__, the default state is None.
  • For a new-style class that has an instance __dict__ and no __slots__, the default state is self.__dict__.
  • For a new-style class that has an instance __dict__ and __slots__, the default state is a tuple consisting of two dictionaries: self.__dict__, and a dictionary mapping slot names to slot values. Only slots that have a value are included in the latter.
  • For a new-style class that has __slots__ and no instance __dict__, the default state is a tuple whose first item is None and whose second item is a dictionary mapping slot names to slot values described in the previous bullet.

The __setstate__ method

The __setstate__ method should take one argument; it will be called with the value returned by __getstate__ or with the default state described above if no __getstate__ method is defined.

If no __setstate__ method exists, a default implementation is provided that can handle the state returned by the default __getstate__, described above.

The __getnewargs__ method

Like for classic classes, the __setstate__ method (or its default implementation) requires that a new object already exists so that its __setstate__ method can be called.

In protocol 2, a new pickling opcode is used that causes a new object to be created as follows:

obj = C.__new__(C, *args)

where C is the class of the pickled object, and args is either the empty tuple, or the tuple returned by the __getnewargs__ method, if defined. __getnewargs__ must return a tuple. The absence of a __getnewargs__ method is equivalent to the existence of one that returns ().

The __newobj__ unpickling function

When the unpickling function returned by __reduce__ (the first item of the returned tuple) has the name __newobj__, something special happens for pickle protocol 2. An unpickling function named __newobj__ is assumed to have the following semantics:

def __newobj__(cls, *args):
    return cls.__new__(cls, *args)

Pickle protocol 2 special-cases an unpickling function with this name, and emits a pickling opcode that, given ‘cls’ and ‘args’, will return cls.__new__(cls, *args) without also pickling a reference to __newobj__ (this is the same pickling opcode used by protocol 2 for a new-style class instance when no __reduce__ implementation exists). This is the main reason why protocol 2 pickles are much smaller than classic pickles. Of course, the pickling code cannot verify that a function named __newobj__ actually has the expected semantics. If you use an unpickling function named __newobj__ that returns something different, you deserve what you get.

It is safe to use this feature under Python 2.2; there’s nothing in the recommended implementation of __newobj__ that depends on Python 2.3.

The extension registry

Protocol 2 supports a new mechanism to reduce the size of pickles.

When class instances (classic or new-style) are pickled, the full name of the class (module name including package name, and class name) is included in the pickle. Especially for applications that generate many small pickles, this is a lot of overhead that has to be repeated in each pickle. For large pickles, when using protocol 1, repeated references to the same class name are compressed using the “memo” feature; but each class name must be spelled in full at least once per pickle, and this causes a lot of overhead for small pickles.

The extension registry allows one to represent the most frequently used names by small integers, which are pickled very efficiently: an extension code in the range 1–255 requires only two bytes including the opcode, one in the range 256–65535 requires only three bytes including the opcode.

One of the design goals of the pickle protocol is to make pickles “context-free”: as long as you have installed the modules containing the classes referenced by a pickle, you can unpickle it, without needing to import any of those classes ahead of time.

Unbridled use of extension codes could jeopardize this desirable property of pickles. Therefore, the main use of extension codes is reserved for a set of codes to be standardized by some standard-setting body. This being Python, the standard-setting body is the PSF. From time to time, the PSF will decide on a table mapping extension codes to class names (or occasionally names of other global objects; functions are also eligible). This table will be incorporated in the next Python release(s).

However, for some applications, like Zope, context-free pickles are not a requirement, and waiting for the PSF to standardize some codes may not be practical. Two solutions are offered for such applications.

First, a few ranges of extension codes are reserved for private use. Any application can register codes in these ranges. Two applications exchanging pickles using codes in these ranges need to have some out-of-band mechanism to agree on the mapping between extension codes and names.

Second, some large Python projects (e.g. Zope) can be assigned a range of extension codes outside the “private use” range that they can assign as they see fit.

The extension registry is defined as a mapping between extension codes and names. When an extension code is unpickled, it ends up producing an object, but this object is gotten by interpreting the name as a module name followed by a class (or function) name. The mapping from names to objects is cached. It is quite possible that certain names cannot be imported; that should not be a problem as long as no pickle containing a reference to such names has to be unpickled. (The same issue already exists for direct references to such names in pickles that use protocols 0 or 1.)

Here is the proposed initial assignment of extension code ranges:

First Last Count Purpose
0 0 1 Reserved — will never be used
1 127 127 Reserved for Python standard library
128 191 64 Reserved for Zope
192 239 48 Reserved for 3rd parties
240 255 16 Reserved for private use (will never be assigned)
256 MAX MAX Reserved for future assignment

MAX stands for 2147483647, or 2**31-1. This is a hard limitation of the protocol as currently defined.

At the moment, no specific extension codes have been assigned yet.

Extension registry API

The extension registry is maintained as private global variables in the copy_reg module. The following three functions are defined in this module to manipulate the registry:

add_extension(module, name, code)
Register an extension code. The module and name arguments must be strings; code must be an int in the inclusive range 1 through MAX. This must either register a new (module, name) pair to a new code, or be a redundant repeat of a previous call that was not canceled by a remove_extension() call; a (module, name) pair may not be mapped to more than one code, nor may a code be mapped to more than one (module, name) pair.
remove_extension(module, name, code)
Arguments are as for add_extension(). Remove a previously registered mapping between (module, name) and code.
clear_extension_cache()
The implementation of extension codes may use a cache to speed up loading objects that are named frequently. This cache can be emptied (removing references to cached objects) by calling this method.

Note that the API does not enforce the standard range assignments. It is up to applications to respect these.

The copy module

Traditionally, the copy module has supported an extended subset of the pickling APIs for customizing the copy() and deepcopy() operations.

In particular, besides checking for a __copy__ or __deepcopy__ method, copy() and deepcopy() have always looked for __reduce__, and for classic classes, have looked for __getinitargs__, __getstate__ and __setstate__.

In Python 2.2, the default __reduce__ inherited from ‘object’ made copying simple new-style classes possible, but slots and various other special cases were not covered.

In Python 2.3, several changes are made to the copy module:

  • __reduce_ex__ is supported (and always called with 2 as the protocol version argument).
  • The four- and five-argument return values of __reduce__ are supported.
  • Before looking for a __reduce__ method, the copy_reg.dispatch_table is consulted, just like for pickling.
  • When the __reduce__ method is inherited from object, it is (unconditionally) replaced by a better one that uses the same APIs as pickle protocol 2: __getnewargs__, __getstate__, and __setstate__, handling list and dict subclasses, and handling slots.

As a consequence of the latter change, certain new-style classes that were copyable under Python 2.2 are not copyable under Python 2.3. (These classes are also not picklable using pickle protocol 2.) A minimal example of such a class:

class C(object):
    def __new__(cls, a):
        return object.__new__(cls)

The problem only occurs when __new__ is overridden and has at least one mandatory argument in addition to the class argument.

To fix this, a __getnewargs__ method should be added that returns the appropriate argument tuple (excluding the class).

Pickling Python longs

Pickling and unpickling Python longs takes time quadratic in the number of digits, in protocols 0 and 1. Under protocol 2, new opcodes support linear-time pickling and unpickling of longs.

Pickling bools

Protocol 2 introduces new opcodes for pickling True and False directly. Under protocols 0 and 1, bools are pickled as integers, using a trick in the representation of the integer in the pickle so that an unpickler can recognize that a bool was intended. That trick consumed 4 bytes per bool pickled. The new bool opcodes consume 1 byte per bool.

Pickling small tuples

Protocol 2 introduces new opcodes for more-compact pickling of tuples of lengths 1, 2 and 3. Protocol 1 previously introduced an opcode for more-compact pickling of empty tuples.

Protocol identification

Protocol 2 introduces a new opcode, with which all protocol 2 pickles begin, identifying that the pickle is protocol 2. Attempting to unpickle a protocol 2 pickle under older versions of Python will therefore raise an “unknown opcode” exception immediately.

Pickling of large lists and dicts

Protocol 1 pickles large lists and dicts “in one piece”, which minimizes pickle size, but requires that unpickling create a temp object as large as the object being unpickled. Part of the protocol 2 changes break large lists and dicts into pieces of no more than 1000 elements each, so that unpickling needn’t create a temp object larger than needed to hold 1000 elements. This isn’t part of protocol 2, however: the opcodes produced are still part of protocol 1. __reduce__ implementations that return the optional new listitems or dictitems iterators also benefit from this unpickling temp-space optimization.


Source: https://github.com/python/peps/blob/main/pep-0307.txt

Last modified: 2022-08-24 22:40:18 GMT