Intro
This post compares the pytest results of urllib3 to its nuitka-built
.whl counterpart.
Urllib3 standalone test have already been covered. Manual testing is now
done to compare the pytest results of a nuitka wheel built using
python setup.py bdist_nuitka to the regular pytest of the urllib3
package. Testing is done to ensure that nuitka is building the wheel
correctly. If the pytests pass/fail in the same way, that means Nuitka
built the wheel properly. Else if the tests differ, then something is
wrong. Virtualenv is used to create a clean environment with no outside
pollution.
At first, the urllib3 nuitka-wheel pytest was crashing because of the unsafe assumption that imports will always exist (which is not the case if exceptions are thrown). Issue 413 was filed to record and fix this bug.
After the fixes, the pytests were ran again and the results were very similar:
Regular pytests: ====== 3 failed, 836 passed, 456 skipped, 113 warnings in 47.54 seconds =======
Nuitka wheel pytests: ====== 1 failed, 838 passed, 456 skipped, 113 warnings in 47.59 seconds =======
The extra passes are suspicious and require more investigation into why they happen. To make that easy, we are going to fully automate the process and compare outputs with verbose pytest modes.
Steps to Reproduce
Clone urllib3 and nuitka into a new folder
Inside the urllib3 folder, issue
python -m pip install -r dev-requirements.txtto install its requirements.Issue
python -m pytest --disable-warnings, this runs the regular pytest for urllib3.Change into the nuitka folder and issue
python setup.py develop.Change back into urllib3 and issue
python setup.py bdist_nuitkato build the urllib3 wheel using nuitka. The newly built wheel should be found in thedistfolder.Use pip to uninstall the existing urllib3, then issue
python -m pip installfollowed by the newly built.whlfilename.Issue
python -m pytest --disable-warnings, this runs the nuitka-built wheel pytest for urllib3.
Uncompile Python
urllib3 regular pytest:
$ python -m pytest --disable-warnings
============================= test session starts =============================
platform win32 -- Python 3.7.0, pytest-4.0.0, py-1.8.0, pluggy-0.11.0
rootdir: C:\Users\Tommy\pipenv-testing\urllib3-testing\urllib3, inifile: setup.cfg
plugins: timeout-1.3.1
collected 1295 items
test\test_collections.py ....................................s [ 2%]
test\test_compatibility.py ... [ 3%]
test\test_connection.py ..... [ 3%]
test\test_connectionpool.py ............................................ [ 6%]
........................... [ 8%]
test\test_exceptions.py ............. [ 9%]
test\test_fields.py ............... [ 11%]
test\test_filepost.py ........... [ 11%]
test\test_no_ssl.py .. [ 12%]
test\test_poolmanager.py ......................... [ 14%]
test\test_proxymanager.py ... [ 14%]
test\test_queue_monkeypatch.py . [ 14%]
test\test_response.py ..................sss............................. [ 18%]
........... [ 19%]
test\test_retry.py ..............................F.F.F.. [ 21%]
test\test_ssl.py ............................... [ 24%]
test\test_util.py ...................................................... [ 28%]
........................................................................ [ 34%]
....................ss.s...s............................................ [ 39%]
............ [ 40%]
test\test_wait.py ...ssssss [ 41%]
test\contrib\test_pyopenssl.py sssssssssssssssssssssssssssssssssssssssss [ 44%]
ssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss [ 49%]
ssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss [ 55%]
ssssssssssssssssssss [ 57%]
test\contrib\test_pyopenssl_dependencies.py ss [ 57%]
test\contrib\test_securetransport.py sssssssssssssssssssssssssssssssssss [ 59%]
ssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss [ 65%]
ssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss [ 71%]
sssssssssssssssssss [ 72%]
test\contrib\test_socks.py .................. [ 73%]
test\with_dummyserver\test_chunked_transfer.py ........ [ 74%]
test\with_dummyserver\test_connectionpool.py ........................... [ 76%]
....................................... [ 79%]
test\with_dummyserver\test_https.py .....................s....s......... [ 82%]
.................................................Uncaught exception, closing connection.
........................................................................ [ 87%]
................................sssssssssssssssssssssssssssssssssss.... [ 93%]
test\with_dummyserver\test_no_ssl.py .. [ 93%]
test\with_dummyserver\test_poolmanager.py ............... [ 94%]
test\with_dummyserver\test_proxy_poolmanager.py ................ [ 95%]
test\with_dummyserver\test_socketlevel.py .............................. [ 98%]
...................... [100%]
====== 3 failed, 836 passed, 456 skipped, 113 warnings in 47.54 seconds =======
Compiled with Nuitka
nuitka wheel pytest:
$ python -m pytest --disable-warnings
============================= test session starts =============================
platform win32 -- Python 3.7.0, pytest-4.0.0, py-1.8.0, pluggy-0.11.0
rootdir: C:\Users\Tommy\pipenv-testing\urllib3-testing\urllib3, inifile: setup.cfg
plugins: timeout-1.3.1
collected 1295 items
test\test_collections.py ....................................s [ 2%]
test\test_compatibility.py ... [ 3%]
test\test_connection.py ..... [ 3%]
test\test_connectionpool.py ............................................ [ 6%]
........................... [ 8%]
test\test_exceptions.py ............. [ 9%]
test\test_fields.py ............... [ 11%]
test\test_filepost.py ........... [ 11%]
test\test_no_ssl.py .F [ 12%]
test\test_poolmanager.py ......................... [ 14%]
test\test_proxymanager.py ... [ 14%]
test\test_queue_monkeypatch.py . [ 14%]
test\test_response.py ..................sss............................. [ 18%]
........... [ 19%]
test\test_retry.py ..................................... [ 21%]
test\test_ssl.py ............................... [ 24%]
test\test_util.py ...................................................... [ 28%]
........................................................................ [ 34%]
....................ss.s...s............................................ [ 39%]
............ [ 40%]
test\test_wait.py ...ssssss [ 41%]
test\contrib\test_pyopenssl.py sssssssssssssssssssssssssssssssssssssssss [ 44%]
ssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss [ 49%]
ssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss [ 55%]
ssssssssssssssssssss [ 57%]
test\contrib\test_pyopenssl_dependencies.py ss [ 57%]
test\contrib\test_securetransport.py sssssssssssssssssssssssssssssssssss [ 59%]
ssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss [ 65%]
ssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss [ 71%]
sssssssssssssssssss [ 72%]
test\contrib\test_socks.py .................. [ 73%]
test\with_dummyserver\test_chunked_transfer.py ........ [ 74%]
test\with_dummyserver\test_connectionpool.py ........................... [ 76%]
....................................... [ 79%]
test\with_dummyserver\test_https.py .....................s....s......... [ 82%]
........................................................................ [ 87%]
................................sssssssssssssssssssssssssssssssssss.... [ 93%]
test\with_dummyserver\test_no_ssl.py .. [ 93%]
test\with_dummyserver\test_poolmanager.py ............... [ 94%]
test\with_dummyserver\test_proxy_poolmanager.py ................ [ 95%]
test\with_dummyserver\test_socketlevel.py .............................. [ 98%]
...................... [100%]
====== 1 failed, 838 passed, 456 skipped, 113 warnings in 47.59 seconds =======